OPERATION
Changing Channels
There are three ways of channel selection - stepping through the channel list, selection by number
and from the on-screen channel list.
Stepping through the channel list:
Selected by number:
Selected by on-screen channels list:
1
2
3
To move through the channel list, press the upward arrow or downward arrow key on the
remote control.
Enter the channel number directly by pressing numeric buttons, and press the "OK" button
to select desired channel.
You can also select the required channel directly from on-screen channel list. This is
displayed using the STB's main menu. See "Channel List" in this manual for operation detail.
1
1
English
1
5
English
To Next Page
Loading...
