Chapter 6: Programming Information A794 Owner’s Guide
December 199950
Command Conventions
The following information describes how each command is organized:
Name: Name of command.
ASCII: The ASCII control code.
Hexadecimal: The Hexadecimal control code.
Decimal: The Decimal control code.
Value: A description of the command operands.
Range: The upper and lower limits of the command operand.
Default: The command operand default after printer reset.
Description: Brief description and summary of the command.
Formulas: Any formulas used for this command.
Exceptions: Describes any exceptions to this command, for example:
incompatible commands.
Related Information: Describes related information for this command, for example:
bit information.
To Next Page
Loading...
