AXIS P1346 Network Camera
Accessing the product
Note
• The default administrator user name root is permanent a nd cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See Reset to factory default
settings, on page 50.
Configure capture mode
Capture mode defines the maximum resolution and maximum frame rate available in the Axis prod uct. The capture mode setting a lso
affects the camera’s angle of view; if using a capture mode with a smaller maximum reso lution, the angle of view is red uced.
Select the desired capture mode from the drop-down list and click OK.
See also Capture Mode, on page 21.
The Live View page
If the Axis product has been customized to meet specific requirements, not all the items described below will appea r in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.
The Stream Profile drop-down list allows you to select a custom ized or pre-program med stream profile. Stream
profiles are configured under Video & Audio > Stream Profiles.SeeStream Profiles, on page 20.
Click Pulse to activate the output for a defined period of time, such a s s w itching on an external light for 20 seconds.
12
To Next Page
Loading...
Need help?
General
