Axis 210 User Manual (English)

Other manuals for Axis 210

User Manual66 pages

Specifications2 pages

Installation Guide43 pages

Questions and Answers:

K
Kenneth PerezAug 23, 2025
What to do if Axis Security Camera cannot be accessed from a browser?
- M
  Michael MurphyAug 23, 2025
  If you cannot access your Axis Security Camera from a browser, here are a few things to check: * If the IP address has been changed by DHCP, move the camera to an isolated network or one without a DHCP or BOOTP server and reset the IP address using AXIS IP Utility or ARP/Ping commands. Alternatively, disable DHCP in the TCP/IP settings. * If you are using a proxy server, try disabling the proxy settings in your browser. * Test the network cable and connectors by connecting them to another network device and pinging that device from your workstation. * If you cannot log in and HTTPS is enabled, ensure you are using the correct protocol (HTTP or HTTPS) in your browser's address bar. * Check that the host name and DNS server settings are correct.
S
Sheila DavisAug 30, 2025
Why is there no audio on my Axis 210A/211A Security Camera?
- B
  Brittney FoxAug 30, 2025
  If there is no audio on your Axis 210A/211A Security Camera, check that the sound card in the PC and the connections to the speaker and microphone are working. Ensure that the mute button is not pressed and the volume settings are correct. Ensure that full-duplex is selected if you want to have two way audio communication.
G
golsonAug 29, 2025
How to resolve Axis Security Camera when browser freezes?
- K
  Kelsey GrantAug 30, 2025
  If your browser freezes when using the Axis Security Camera, try lowering the image resolution.
T
Thomas MoralesAug 28, 2025
What to do if Axis 210 Security Camera images are blurred?
- J
  Jermaine DonaldsonAug 29, 2025
  If the images from your Axis Security Camera are blurred, refocus the camera. Check in the Video & Image > Advanced - Camera Settings that DC-Iris (AXIS 211/211A only) is set to Enabled. If the images are still blurred adjust the metal ring until the image is sharp.
P
patelethanAug 28, 2025
Why is my Axis 210 Security Camera accessible locally but not externally?
- B
  bethany35Aug 28, 2025
  If your Axis Security Camera is accessible locally but not externally, check the Internet firewall with your system administrator and verify if you need to configure the default router settings.
M
Matthew JensenAug 27, 2025
How to resolve Axis 210 problems setting the IP address?
- K
  Kristen WellsAug 27, 2025
  If you are experiencing problems setting the IP address for your Axis Security Camera, consider the following: * When using ARP/Ping, try the installation again. Ensure the IP address is set within two minutes after powering on the camera and that the Ping length is set to 408. * If the camera is on a different subnet, contact your network administrator to obtain an appropriate IP address. * If the IP address is being used by another device, disconnect the camera, run the Ping command, and if you receive a reply, obtain a new IP address and reinstall the unit. If you see 'Request timed out,' check all cabling and reinstall the unit. * To avoid IP address conflicts, set the static IP address to 0.0.0.0.
E
Emily GreerAug 26, 2025
How to fix Axis 210 Security Camera when motion detection triggers unexpectedly?
- C
  Crystal JacksonAug 27, 2025
  If the motion detection in your Axis Security Camera triggers unexpectedly, it might be due to changes in luminance. To resolve this, lower the sensitivity setting to avoid these issues.
J
jmaldonadoAug 25, 2025
What to do if Axis Security Camera cannot be accessed from a web browser?
- T
  Tanya BlackAug 26, 2025
  If you cannot access your Axis Security Camera from a web browser, the IP address may have been changed by DHCP. Here's how to resolve it: 1. Move the camera to an isolated network without a DHCP server. Reset the IP address using AXIS IP Utility or ARP/Ping commands. 2. Access the unit and disable DHCP in the TCP/IP settings. Return the unit to the main network, so the unit will now use a fixed IP address. 3. Alternatively, if you need a dynamic IP address, configure IP address change notification from the network settings. Return the unit to the main network. The unit will notify you if the address changes. Also, test the network cable by connecting it to another network device and pinging that device from your workstation.
B
bruce23Aug 25, 2025
How to fix Axis Security Camera IP address setting problems?
- A
  Ashley HartAug 25, 2025
  If you're having trouble setting the IP address on your Axis Security Camera, here are a few things to check: * If using ARP/Ping, try the installation again, ensuring the IP address is set within two minutes of powering on the camera and that the Ping length is set to 408. * If your computer and the camera are on different subnets, contact your network administrator for an appropriate IP address. * If the IP address is already in use, disconnect the camera and use the Ping command to check. If you get a reply, the address is in use; get a new one and reinstall. If it times out, check cabling and reinstall. * To avoid IP address conflicts, set the static IP address to 0.0.0.0.

Axis 210 Specifications

General

Connectivity	Wired
Sensor Type	CCD
Resolution	640x480
Compression	Motion JPEG
Video Compression	Motion JPEG
Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
Image Sensor	1/4" CCD
Frame Rate	30 fps
Network Interface	10/100 Ethernet
Protocols	HTTP, TCP/IP, SMTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, UDP, IGMP, ICMP, ARP
Network Protocols	HTTP, TCP/IP, SMTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, UDP, IGMP, ICMP, ARP
Operating Humidity	20% to 80% (non-condensing)