Axis 241Q - Configuring the Video Server; Accessing the Setup Tools

23
AXIS 241Q/241S - Configuring the video server
Configuring the video server
This section describes how to configure the AXIS 241Q/241S and is intended for:
• administrators, who have unrestricted access to all the Setup tools
• operators, who have access to the Video & Image, Live View Config and Event Config-
uration settings.
The AXIS 241Q/241S is configured from the Setup link, in a standard browser (see
Technical Specifications, on page 57).
Accessing the Setup tools
Follow the instructions below to access the Setup Tools from a browser.
1. Start the browser and enter the IP address or host name of the AXIS 241Q/241S in
the location/address field.
2. The Live View page is now displayed. Click Setup to display the Setup tools.
Setup tools