9
AXIS 241Q/241S - Product Description
AXIS 241Q/241S Rear Panel
The Serial Number is
located on the label
on the underside of
the unit.
Power Supply Connector - A single socket for connection of the PS-K power adapter.
I/O Terminal connector - The I/O Terminal connector provides the physical interface to 4
digital transistor outputs, 4 digital inputs and an RS-485 interface. See
Unit Connectors, on
page 48 for more information.
Note: The I/O Terminal connector also provides an auxiliary connection point for DC
power.
Network Connector - The AXIS 241Q/241S connects to the network via a standard
network cable. The AXIS 241Q/241S detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet).
RS-232 Serial Connector - A 9-pin D-sub connector providing an RS-232 serial
connection. Typically used for connecting Pan/Tilt/Zoom devices. See
Unit Connectors, on
page 48 for more information.
To Next Page
Loading...
