2
Avoid installing the unit in direct sunlight or near hot air vents. Please note that the
normal working temperature of the unit is between -5ć to +50ć. If the internal
temperature of the vehicle is extremely high, a short cooling down period is necessary
before operating the unit.
W If the temperature inside the car is very low and the monitor is used soon after
switching on the heater, moisture may form on the panel of the unit. Turn off the
unit immediately! Failure to do so may cause the internal components to short.
Allow the unit to rest for about one hour to allow the condensation to disappear
before continue operation.
In extremely cold temperatures, the movement of the picture may be slow and the
picture may be dark. It is not a malfunction. The unit will work normally once it reaches
its operating temperature.
Do not drop or hit the LCD panel with a hard object, as it may cause permanent damage
to the LCD panel. Should LCD panel break, avoid touching glass and fluid.
Due to different car specifications, please kindly ensure that the display monitor is
properly located and not obstructing the air-conditioning vent.
Avoid inserting any foreign objects into the slot of the disc Player. Failure to observe this
may cause malfunction due to the precise mechanism of this unit.
Protect your disc. When you leave the car, be sure to eject the disc from this unit and
store it separately away from direct sun light.
Heat and humidity may damage a disc.
Use the supplied screws to fix the monitor Metal Mounting Plate.
To Next Page
Loading...
