11
Playing a disc (DVD or CD)
1. Put the headphones on your head and turn the headphone power on.
2. Assuming the power is on, insert a disc into the player. The player display “Loading”.
3. Aim the remote control directly at the IR receiver on the player and press the play/pause
button or press ENTER (on the remote).
Using the remote control
z Use the remote control only inside the vehicle.
z Use the remote control no further than five feet (three meters) from the sensor.
z Direct sunlight (or a very bright light) reduces sensitivity to remote signals. Do not use
the player in direct sunlight.
z Any object than comes between the infrared sensor and the remote control may disrupt
reception.
Controlling playback
z To pause and resume, press the play/pause button( )..
z To stop playback, press the stop button( ).
If you press the stop button ( ) and then press the play/pause button ( ) again,
playback begins from the beginning of the last chapter played, not the last exact
location when you interrupted playback.
z To play back the previous track or chapter, press the previous button ( ).
z To play back the next track or chapter, press the next button ( ).
z To remove the CD or DVD, press the eject button ( ).
z To mute the sound, press the MUTE button on the remote. Press this button again to
enable sound again.
Playing DVDs
Accessing the root menu
A DVD is divided into titles and chapters. The root menu shows the contents of the disc.
Some DVDs only allow you to select disc playback options from the DVD root menu.
To access the root menu of the DVD, press the RETURN or TITLE button during playback.
Status information
To view status information about the current viewing session, press the DISPLAY button
continuously to cycle through the following information.
To Next Page
Loading...
