Axis AX1800BT 2 Series - ADVANCED OPERATING MODES; MP3;WMA Playback Controls; Mode Selection and Tuning; Station Scan and System Reset

6
6
Recall a station:
1. Select band (if needed)
2. Press a preset button for less than one second to select stored station.
(B) MP3 PLAYER MODE:
1. PAUSE 2. REPEAT 3. INTRO 4. RANDOM
5. STEREO/MONO SELECTOR (ST)
This function will only affect FM reception. Press this button if the FM reception becomes noisy/hissy.
If the station being received is in stereo, it will now be heard in mono. Press this button again for normal
reception.
6. EQUALIZER CONTROL (EQ)
Press EQ to select equalizer modes.
7. LOCAL/DISTANT BUTTON (LOC)
Press this button in strong signal areas to allow the radio to scan strong stations during manual tuning
(LOC appears). Press to Distant position for listening to weak stations.
8. MODE BUTTON (MD)
Press this key, to select AUX/TUNER/USB/SD/BT mode.
9. BAND SELECTOR / CLOCK DISPLAY BUTTON (BD)
Press this button to toggle through the preset Radio FM1---FM2---FM3---AM1---AM2.
Press and hold BD button to show the clock.
10. AUTOMATIC OR MANUAL TUNING (FREQ UP
OR FREQ DOWN )
(A) RADIO MODE
When pressed for less than 1 second, the unit operates in manual tuning mode.
When pressed longer than 1 second, the unit operates in automatic tuning mode.
If the keys are not pressed again within 3 seconds, the unit will return to SEEK mode.
(B) MP3/WMA PLAYER MODE
When pressed for less than 1 second, they will operate as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 second, they will operate as CUE or REVIEW mode.
11. AUTOMATICALLY STORE STATIONS (AS/PS)
Select six strong stations and store them in current band.
1. Select a band (if needed)
2. Hold AS/PS button for more than three seconds. The new stations replace those already stored in that
band.
Preset Scan
To scan stations stored in current band.
1. Select a band (if needed)
2. Press AS/PS for more than one second but less than three. The radio pauses for ve seconds at each
statio. Press AS/PS again to stop scanning when desired station is found.
12. LCD DISPLAY
The Liquid Crystal Display will show the current settings of the unit.
13. RESET SWITCH
Press to reset system settings to factory default.