5
Operation
Turn on/off the unit & Mute function
Pressing MUTE button to turn on the unit. When the unit is on. Shortly press this but-
ton for mute on/off. Press and hold this button to turn off the unit.
Sound and setting adjustment
Shortly press SEL button into the audio menu:
BASS->TRE->BAL->FAD->EQ(class/rock/pop/flat/off)->LOUD(on/off)
Press and hold SEL button for the setting menu:
CLOCK(HH)->CLOCK(MM)->CT(indep/sync)-CLOCK(24/12)->BEEP->P-VOL->AREA(AUS/
USA)->DX/LOC->STEREO/MONO
In each item rotating the VOL knob to set them.
Clock setting by manual
In the CLOCK(HH)/CLOCK(MM) item of the setting menu, rotate the VOL knob to set the
hour/minute.
CT(INDEP/SYNC):
CT INDEP: The clock works independently.
CT SYNC: The clock will be synchronized to the received RDS station’s time.
Note: When the time was set by manual (See above).
The CT will back to INDEP mode automatically.
CLOCK 24/12: Setting the time to 24H or 12H format.
BEEP (ON/OFF): Turn on/off the beep sound.
P-VOL (Preset VOL): Setting the power on volume. If the volume at shutdown is small
than the P-VOL. Next time turn on the unit, the volume will be maintained at shutdown
volume. If the volume at shutdown is greater than the P-VOL. Next time turn on the unit the
volume will be restored to the P-VOL value.
AREA (AUS/USA): To choose Australia or USA frequency.
DX/LOC (Distance/Local):
LOC: Receive the strong signal station only in seek station.
DX: Receive strong and weak signal station in seek the station.
STEREO/MONO:
STEREO: Receive FM stereo signal.
MONO: Change FM stereo to monochrome. It can reduce the noise when the signal
is weak.
Play music via the aux in 3.5mm jack
To Next Page
Loading...
Need help?
General
