6
Operation
Press MODE button switch to AUX IN source when inserted an audio source to the 3.5mm
jack of the unit.
Reset the unit
Press RESET button to restore all the data to factory settings.
(Note: all memories will be lost.)
RADIO OPERATION
Receive a radio station
Press MODE button to select FM or AM source. Then press BAND button to select a band.
Shortly press / button to receive the desired radio station. Press and hold
/ button for manual tuning the frequency.
Auto Store station
Press and hold BAND button for 2 seconds to auto store stations to numeric buttons 1-6 of
band 1~3.
Manually store station & recall preset station
Tuning to a station with or button. Press and hold one of the 1- 6 preset button
for 2 seconds. The current station is stored into the number button. Shortly press the preset
button (1~6) to directly listen the station that saved in the corresponding preset button.
USB/SD CARD operation
When an USB driver inserted to the unit, the unit will play the MP3/WMA file automatically.
If an USB drive is already inserted in the unit. Keep pressing MODE button shortly until the
USB mode display appears.
Select file
Press / button to skip to next/previous file. Hold / button to fast forward
or fast reverse.
Play/Pause
Press button to pause/playing the file.
INT function:
Press INT button to play the first 10 seconds each file. Press INT button again to cancel
this function.
RPT function:
Press 3/RPT button to select repeat mode.
RPT FOLD: Repeat all files of the folder.
RPT ONE: Repeat the same file.
RPT ALL: Repeat all files (default).
Random function:
Press RDM button, all files will be played randomly. Press it again to cancel this function.
To Next Page
Loading...
