Axis F41 User Manual

AXISF41MainUnit
SystemOptions
Note
•Iftheproductisresettofactorydefault,allcerticates,exceptpreinstalledCAcerticates,willbedeleted.
•Iftheproductisresettofactorydefault,allpreinstalledCAcerticatesthathavebeendeletedwillbereinstalled.
Howtocreateaself-signedcerticate
1.GotoSetup>SystemOptions>Security>Certicates.
2.ClickCreateself-signedcerticateandprovidetherequestedinformation.
HowtocreateandinstallaCA-signedcerticate
1.Createaself-signedcerticate,seeHowtocreateaself-signedcerticateonpage48.
2.GotoSetup>SystemOptions>Security>Certicates.
3.ClickCreatecerticatesigningrequestandprovidetherequestedinformation.
4.CopythePEM-formattedrequestandsendtotheCAofyourchoice.
5.Whenthesignedcerticateisreturned,clickInstallcerticateanduploadthecerticate.
HowtoinstalladditionalCAcerticates
1.GotoSetup>SystemOptions>Security>Certicates.
2.ClickInstallcerticateanduploadthecerticate.
AudioSupport
SelectEnableaudiosupporttoallowclientstoretrieveaudiostreamsfromtheAxisproduct.Forinformationonhowtocongure
audiosettings,seeSetUpAudioonpage25.
Note
DeselectingthisoptionwilldisableaudiogloballyintheAxisproduct,forconguredeventsandproleswithaudioaswell.
Date&Time
TheAxisproduct’sdateandtimesettingsareconguredunderSystemOptions>Date&Time.
CurrentServerTimedisplaysthecurrentdateandtime(24hclock).Thetimecanbedisplayedin12hclockinthetextoverlay(see
below).
Tochangethedateandtimesettings,selectthepreferredTimemodeunderNewServerTime:
•Synchronizewithcomputertime–Setsdateandtimeaccordingtothecomputer’sclock.Withthisoption,dateand
timearesetonceandwillnotbeupdatedautomatically.
•SynchronizewithNTPServer–ObtainsdateandtimefromanNTPserver.Withthisoption,dateandtimesettingsare
updatedcontinuously.ForinformationonNTPsettings,seeNTPCongurationonpage51.
IfusingahostnamefortheNTPserver,aDNSservermustbecongured.SeeDNSCongurationonpage51.
•Setmanually–Allowsyoutomanuallysetdateandtime.
IfusinganNTPserver,selectyourTimezonefromthedrop-downlist.Ifrequired,checkAutomaticallyadjustfordaylightsaving
timechanges.
48

Axis F41 Specifications

General

Type	Main Unit
Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
Model	F41
Resolution	1080p
Day and Night	Yes
Video Compression	H.264 (MPEG-4 Part 10/AVC), Motion JPEG
Audio Compression	AAC-LC, G.711, G.726
Audio Support	Two-way audio
Audio Output	Line output
Security	HTTPS encryption, IEEE 802.1X, IP address filtering, Password protection, User access log
Supported Protocols	IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, RTSP, RTP, TCP, UDP, UPnP
Application Programming Interface	VAPIX®
Power over Ethernet	Yes (IEEE 802.3af)
Connectors	RJ45 10BASE-T/100BASE-TX
Image Sensor	Progressive scan RGB CMOS 1/2.8”
Resolutions	1920x1080 to 320x180