Page 10 AXIS M31 Network Camera Series
LED indicators
Note: The Network and Status LEDs can be configured to be unlit dur-
ing normal operation from Setup > System Options > LED settings; and
the Status LED can also be configured to flash only when the camera is
accessed. See online help files for more information.
LED Color Indication
Network Green Steady for connection to a 100 Mbit/s net-
work. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network.
Flashes for network activity.
Unlit No network connection.
Status Green Steady green for normal operation.
Amber Steady during startup, during reset to factory
default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware
upgrade.
To Next Page
Loading...
Need help?
General
