Need help?Do you have a question about the Axis M3114-R and is the answer not in the manual?
General| Environment | Indoor |
|---|---|
| Form Factor | Dome |
| Connectivity | Wired |
| Resolution | 1280 x 800 |
| Sensor Type | CMOS |
| Field of View | 80° |
| Digital Zoom | Yes |
| Frame Rate | 30 fps |
| Compression | H.264, MJPEG |
| Power over Ethernet | Yes |
| Power Source | PoE or 12V DC |
| Audio Support | No |
| Day/Night | Yes |
| Light Sensitivity | 0.5 Lux |
| Minimum Illumination | 0.5 Lux |
| Network Interface | Ethernet |
| Protocols | HTTP, HTTPS, FTP, RTSP, RTP, SMTP, DHCP, UPnP |
| Operating Temperature | 0°C to 50°C |
| Weight | 300 g |
| Image Sensor Size | 1/4 inch |
| Lens | Fixed focal length: 2.8 mm |
Step-by-step instructions to access the camera via a web browser.
How to configure the product for access from outside the local network.
Instructions for setting a secure password for the administrator root user.
Overview of the camera's live video feed interface and its controls.
Description of interactive elements available on the live video display.
Shortcuts to initial settings required before using the Axis product.
Defines settings for video stream quality, resolution, and compression.
Advanced image adjustments for color, brightness, sharpness, and contrast.
Explains the H.264 video compression standard and its parameters.
Selects the preferred viewer for displaying video streams in different browsers.
Saves and recalls specific camera views for quick navigation.
Configures alarms for unauthorized camera manipulation or obstruction.
Sets up zones and parameters to detect movement within the camera's view.
Guides on defining areas for motion detection and exclusion.
Explains object size, history, and sensitivity settings for motion detection.
Defines conditions and actions for the camera to perform automatically.
Configuration options for user access, network security, and authentication.
Settings related to network connectivity and protocols.
Fundamental network configuration for IP version 4 and 6.
How to configure the IPv4 address, DHCP, or static IP.
More detailed network configuration options.
Enables external access to the camera through a router.
Restores the camera to its original factory configuration.
Steps to update the camera's firmware with the latest version.
Instructions for recovering the camera if firmware upgrade fails.
A guide to common problems and their solutions.
Troubleshooting steps for issues related to setting the camera's IP address.
To Next Page
