Axis M3116-LVE - Applications

AXISM31NetworkCameraSeries
Configureyourdevice
7.Setthepostbuffertimeto60seconds.
8.ClickSave.
Sendanemailautomaticallyifsomeonespraypaintsthelens
Activatethetamperingdetection:
1.Click
andselectLegacydeviceinterface.
2.GotoSystem>Detectors>Cameratampering.
3.SetadurationforTriggerafter.Thevalueindicatesthetimethatmustpassbeforeanemailissent.
4.TurnonTriggerondarkimages.Thiswilltriggeranalarmifthelensissprayed,covered,orrenderedseverelyoutoffocus.
Addarecipient:
5.GotoSystem>Events>RecipientsandclickAddrecipient.
6.Typeanamefortherecipient.
7.SelectEmail.
8.Typeanemailaddresstosendtheemailto.
9.Thecameradoesn’thaveit’sownemailserver,soitwillneedtologintoanotheremailservertobeabletosendmails.Fill
intherestoftheinformationaccordingtoyouremailprovider.
10.Tosendatestemail,clickTest.
11.ClickSave.
Createarule:
12.GotoSystem>Events>RulesandclickAddarule.
13.Typeanamefortherule.
14.Inthelistofconditions,selectTampering.
15.Inthelistofactions,selectSendnoticationtoemail.
16.Selectarecipientfromthelist.
17.Typeasubjectandamessagefortheemail.
18.ClickSave.
Applications
Applications
AXISCameraApplicationPlatform(ACAP)isanopenplatformthatenablesthirdpartiestodevelopanalyticsandotherapplications
forAxisproducts.Tondoutmoreaboutavailableapplications,downloads,trialsandlicenses,gotoaxis.com/applications.
TondtheusermanualsforAxisapplications,gotoaxis.com.
Note
•Severalapplicationscanrunatthesametimebutsomeapplicationsmightnotbecompatiblewitheachother.Certain
combinationsofapplicationsmightrequiretoomuchprocessingpowerormemoryresourceswhenruninparallel.Verify
thattheapplicationsworktogetherbeforedeployment.
17