Axis M4215-LV - Configure Your Device; Basic Settings; Adjust the Image

To Next Page

To Previous Page

AXISM4215-LVDomeCamera

Conﬁgureyourdevice

Basicsettings

Setthemountingposition

1.GotoVideo>Installation>Mountingposition.

2.ClickChange.

3.SelectamountingpositionandclickSaveandrestart.

Setthepowerlinefrequency

1.GotoVideo>Installation>Powerlinefrequency.

2.ClickChange.

3.SelectapowerlinefrequencyandclickSaveandrestart.

Settheorientation

1.GotoVideo>Installation>Rotate.

2.Select0,90,180or270degrees.

SeealsoMonitorlongandnarrowareasonpage8.

Adjusttheimage

Thissectionincludesinstructionsaboutconguringyourdevice.Ifyouwanttolearnmoreabouthowcertainfeatureswork,go

toLearnmoreonpage43.

Adjustthezoomandfocus

Toadjustthezoom:

1.GotoVideo>Installationandadjustthezoomslider.

Toadjustthefocus:

1.Click

toshowtheautofocusarea.

2.Adjusttheautofocusareatocoverthepartoftheimagethatyouwanttobeinfocus.

Ifyoudon’tselectanautofocusarea,thecamerafocusesontheentirescene.Werecommendthatyoufocusona

staticobject.

3.ClickAutofocus.

4.Tonetunethefocus,adjustthefocusslider.

OptimizeIRillumination

Dependingontheinstallationenvironmentandtheconditionsaroundthecamera,forexampleexternallightsourcesinthescene,

youcansometimesimprovetheimagequalityifyoumanuallyadjusttheintensityoftheLEDs.Ifyouhaveproblemswithreections

fromtheLEDs,youcantrytoreducetheintensity.

1.GotoVideo>Image>Day-nightmode.

Other manuals for Axis M4215-LV