Axis M4308-PLE - Page 15

AXISM4308-PLEPanoramicCamera
Configureyourdevice
8.ClickSave.
9.Createanotherrulewiththename“Directthecameratothegate".
10.Selectthesameinputsignalasbefore,butasactionselectthepreviouslycreated“Gateentrance”presetposition.
11.ClickSave.
Setuptheintrusionalarm
Usetheintrusionalarmswitchto,forexample,sendanoticationifsomeoneopensthecamerahousing.
Beforeyoustart
•Connecttheintrusionalarmswitchtopin1(ground)andpin3(digitalinput)ofthecamera’sI/Oconnector.
Conguretheinputport
1.GotoSystem>Accessories>I/Oports.
2.ForPort1:
2.1SelectCircuitclosed.
Addarecipient:
3.GotoSystem>Events>RecipientsandclickAddrecipient.
4.Typeanamefortherecipient.
5.SelectEmail.
6.Typeanemailaddresstosendtheemailto.
7.Thecameradoesn’thaveit’sownemailserver,soitwillneedtologintoanotheremailservertobeabletosendmails.Fill
intherestoftheinformationaccordingtoyouremailprovider.
8.Tosendatestemail,clickTest.
9.ClickSave.
Createarule
10.GotoSystem>Events>Rulesandaddarule.
11.Typeanamefortherule.
12.Inthelistofconditions,underI/O,selectDigitalinput.
13.Inthelistofports,selectPort1.
14.Inthelistofactions,underNotications,selectSendnoticationtoemail.
15.SelectarecipientfromthelistorgotoRecipientstocreateanewrecipient.
Tocreateanewrecipient,click.Tocopyanexistingrecipient,click.
16.Typeasubjectandamessagefortheemail.
17.ClickSave.
15