Axis M4308-PLE - Configure Your Device; Adjust the Image

AXISM4308-PLEPanoramicCamera
Configureyourdevice
Configureyourdevice
Adjusttheimage
Thissectionincludesinstructionsaboutconguringyourdevice.Ifyouwanttolearnmoreabouthowcertainfeatureswork,go
toLearnmoreonpage48.
Rotatetheimagewithdigitalroll
Note
Ifyourotatetheimage,allviewsareaffected.
Torotatethe360°view,gotoVideo>Image>OrientationandusetheRollslider.
Youcanalsoenteravaluefortherollangleinthetexteld.
Note
Ifdigitalrollislessthan-90°,ormorethan+90°,thentheleftandtherightaudiochannelsswitchplaceautomatically.This
meansthatwhentheimageisrotated,soistheaudio.
Congurethequadview
Note
Quadviewisavailableinthesemountingpositions:
•Desk
•Ceiling
1.Click
andselectLegacydeviceinterface.
2.SelectQuadviewamongthelivefeedsources.
3.GotoSettings>System>Orientationandclick
.
4.Tochangethevieworder,draganddroptheyellowboxes.
Aboutcapturemodes
Capturemodesetstheboundariesofthevideoimage,affectinghowtheimageiscapturedandprocessed.Beyondaspectratioand
resolution,itaffectsmanyothersettingsaswell,suchas,exposurezones,guardtours,imageoverlays,motiondetection(include
areasandexcludeareas),presetpositions,privacymasks,andviewareas.Thefollowingcapturemodesareavailable:
ViewVideoimageboundaries
Overview
Panorama
DoublePanorama
6