Need help?Do you have a question about the Axis M5525-E and is the answer not in the manual?
General| Sensor type | CMOS |
|---|---|
| Progressive scan | Yes |
| Optical sensor size | 1/2.8 \ |
| Pan range | 0 - 360 ° |
| Pan speed | 150 °/sec |
| Tilt angle range | 0 - 90 ° |
| Angle of rotation | 180 ° |
| Camera shutter speed | 1/66500 - 2 s |
| Minimum illumination | 0.01 lx |
| Digital zoom | 12 x |
| Optical zoom | 10 x |
| Type | IP security camera |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired & Wireless |
| Maximum resolution | 1920 x 1080 pixels |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | H.264, M-JPEG |
| Wi-Fi | - |
| Streaming method | Multicast |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| Supported network protocols | IPv4/v6, HTTP, HTTPS a, SSL/TLS a, QoS Layer 3 DiffServ, FTP, SFTP CIFS/SMB, SMTP, Bonjour, UPnP T M, SNMP v1/v2c/v3(MIB - II, DN, DynDN, NTP, RTSP, RTP, T CP, UDP, IGMP, RT CP, ICMP, DHCP, ARP, SOCKS, SSH |
| Audio input channels | 2 channels |
| Ethernet LAN (RJ-45) ports | 1 |
| IK code | IK09 |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | Black, White |
| International Protection (IP) code | IP66 |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Power source type | PoE |
| Power consumption (max) | 13 W |
| Power consumption (typical) | 6.3 W |
| Power consumption (Power over Ethernet (PoE)) | 6.6 W |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -20 - 50 °C |
Weight and Dimensions| Width | 165 mm |
|---|---|
| Height | 132 mm |
| Weight | 1100 g |
Recommendations for creating and managing secure passwords for device protection.
Procedure for setting the initial root password for enhanced security.
Integrating PIR and relay for gate operation and camera movement.
Procedure to restore the camera to its original factory default settings.
Checking and upgrading the camera's software for new features or fixes.
Addressing common technical problems and their solutions.
Resolving problems with setting the device's IP address, including conflicts.
Troubleshooting inability to access the camera via a web browser, including login issues.
Diagnosing and fixing issues related to video stream quality and accessibility.
To Next Page
