Need help?Do you have a question about the Axis P3227 and is the answer not in the manual?
General| Image Sensor | 1/2.8" Progressive scan CMOS |
|---|---|
| Video Compression | H.264 (MPEG-4 Part 10/AVC), Motion JPEG |
| Audio Support | Yes |
| Power | PoE (IEEE 802.3af) |
| Day/Night | Yes (ICR cut filter) |
| Pan/Tilt/Zoom | Digital PTZ |
| Audio Streaming | Two-way audio |
| Audio Compression | AAC, G.711, G.726 |
| Network Protocols | IPv4, IPv6, HTTP, HTTPS, SSL/TLS, QoS, FTP, SMTP, Bonjour, UPnP, SNMP, RTSP, RTP, TCP, UDP, IGMP, ICMP, DHCP, NTP, RTCP, DNS, SOCKS |
| System Integration | ONVIF Profile S and ONVIF Profile G |
| Event Triggers | Motion detection, audio detection, tampering |
| Event Actions | Recording, notification, output activation |
| Edge Storage | Support for microSD/microSDHC/microSDXC card |
| Connectors | RJ45 10BASE-T/100BASE-TX |
Statement regarding Axis' responsibility for product errors and damages.
Information on patents and third-party software used in the product.
Warning against unauthorized changes to the equipment.
List of registered trademarks and company names.
Details on CE marking directives and harmonized standards for Europe.
Technical standards for electromagnetic compatibility in USA and Canada.
Compliance with photobiological safety standards for risk group 1.
Guidance on proper disposal of WEEE in the European Union.
Visual identification of the camera unit and primary mounting hardware.
Depiction of tools, templates, and authentication keys provided.
Illustrates how to use the mounting template for installation.
Indicates the standard thread size for mounting the bracket.
Steps for disassembling the camera housing.
Instructions for connecting the Power over Ethernet cable.
Guidance on positioning and marking the installation surface.
Procedure for securely attaching the camera to the mounting bracket.
Steps for drilling and fixing the mounting bracket to a surface.
How to route the shielded network cable through the bracket.
Instructions for installing the optional AXIS ACI Conduit Bracket.
Guidance on fitting the M25 conduit connector.
Steps for preparing holes for conduit installation.
How to attach the mounting bracket to the conduit.
Procedure for running the network cable through the conduit.
Information on the PoE standard used by the camera.
Steps for correctly connecting the RJ45 network connector.
Final step of attaching the camera to the bracket using specific screws.
Introduction to software tools for camera setup and management.
Important warning regarding potential eye exposure to light.
Steps for adjusting the camera's field of view.
Warnings and precautions related to the product's IR illumination.
Procedure for removing the protective dome cover.
Steps for securing the camera base to the mounting structure.
Process for fitting the dome cover back onto the camera.
Instructions for tightening the dome cover screws to the specified torque.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Essential guidelines for safe product use, storage, and installation.
Critical safety information regarding the product's internal battery.
Recommendations for cleaning and maintaining the dome cover to preserve image quality.
Highlights essential information for correct product operation.
Provides useful tips for optimal product utilization and maintenance.
To Next Page
