Do you have a question about the Axis P3225-LVE and is the answer not in the manual?
Type | IP security camera |
---|---|
PTZ control | - |
Auto-tracking | Yes |
Placement supported | Outdoor |
Connectivity technology | Wired |
Form factor | Dome |
Mounting type | Ceiling/wall |
Product color | White |
Housing material | Aluminum |
International Protection (IP) code | IP66 |
Maximum resolution | 1920 x 1080 pixels |
Supported video modes | 1080p |
Video formats supported | AVC, H.264, M-JPEG, MPEG4 |
Supported graphics resolutions | 160 x 90, 1920 x 1080 (HD 1080) |
Pan range | -180 - 180 ° |
White balance | Auto |
Tilt angle range | -5 - 75 ° |
Angle of rotation | 190 ° |
Camera shutter speed | 1/142850 - 2 s |
Minimum illumination | 0 lx |
Sensor type | CMOS |
Optical sensor size | 1/2.8 \ |
Optical zoom | - x |
Focus adjustment | 1.4 |
Focal length range | 3 - 10.5 mm |
Security algorithms | 802.1x RADIUS, HTTPS, SSH, SSL/TLS |
Password protection type | User |
Built-in HDD | No |
Flash memory | 256 MB |
Internal memory | 512 MB |
Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
LED type | IR |
Infra-red wavelength | 850 nm |
Night vision distance | 25 m |
Cabling technology | 10/100Base-T(X) |
Supported network protocols | IPv4/v6, HTTP, HTTPS , SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3(MIB - II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
Interface | RJ-45 |
Ethernet LAN (RJ-45) ports | 1 |
Power source type | PoE |
Power consumption (max) | 10.8 W |
Power consumption (typical) | 3.9 W |
Storage temperature (T-T) | -40 - 65 °C |
Operating temperature (T-T) | -30 - 50 °C |
Operating relative humidity (H-H) | 10 - 100 % |
Bundled software | AXIS Camera Companion, AXIS Camera Station |
Weight | 770 g |
---|
Identifies hardware components like network port, SD slot, button, and LED indicators.
Explains the meaning of different LED indicator states.
Steps for accessing the product via browser and configuring Internet access.
Setting password, camera orientation, and capture mode.
Explains H.264 and MJPEG streaming methods and AXIS Media Control.
Essential setup steps and how to adjust focus and zoom.
Configuring video streams and using the pixel counter.
Setting default viewers and viewer options for browsers.
Saving and accessing specific camera views using preset positions.
Configuring tamper detection and motion detection parameters.
Defining conditions (triggers) for automated responses to events.
Locating, playing, and exporting stored video recordings.
Managing users, HTTPS, and IEEE 802.1X network access control.
Troubleshooting firmware and IP address assignment problems.
Details on image sensor, lens, illumination, video compression, resolutions, and frame rates.