Axis P3265-LVE User Manual

AXISP32DomeCameraSeries
Troubleshooting
Troubleshooting
Resettofactorydefaultsettings
WARNING
Possiblyhazardousopticalradiationisemittedfromthisproduct.Itcanbeharmfultotheeyes.Donotstareat
theoperatinglamp.
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultresetsallsettings,includingtheIPaddress,to
thefactorydefaultvalues.
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonwhilereconnectingpower.SeeProductoverviewonpage50.
3.Keepthecontrolbuttonpressedfor15–30secondsuntilthestatusLEDindicatorashesamber.
4.Releasethecontrolbutton.TheprocessiscompletewhenthestatusLEDindicatorturnsgreen.Theproducthasbeenreset
tothefactorydefaultsettings.IfnoDHCPserverisavailableonthenetwork,thedefaultIPaddressis192.168.0.90.
5.UsetheinstallationandmanagementsoftwaretoolstoassignanIPaddress,setthepassword,andaccessthedevice.
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpagesonaxis.com/support.
Youcanalsoresetparameterstofactorydefaultthroughthedevice’swebpage.GotoMaintenance>Factorydefaultandclick
Default.
Firmwareoptions
Axisoffersproductrmwaremanagementaccordingtoeithertheactivetrackorthelong-termsupport(LTS)tracks.Beingonthe
activetrackmeanscontinuouslygettingaccesstoallthelatestproductfeatures,whiletheLTStracksprovideaxedplatformwith
periodicreleasesfocusedmainlyonbugxesandsecurityupdates.
Usingrmwarefromtheactivetrackisrecommendedifyouwanttoaccessthenewestfeatures,orifyouuseAxisend-to-endsystem
offerings.TheLTStracksarerecommendedifyouusethird-partyintegrations,whicharenotcontinuouslyvalidatedagainstthelatest
activetrack.WithLTS,theproductscanmaintaincybersecuritywithoutintroducinganysignicantfunctionalchangesoraffecting
anyexistingintegrations.FormoredetailedinformationaboutAxisproductrmwarestrategy,gotoaxis.com/support/rmware.
Checkthecurrentrmwareversion
Firmwareisthesoftwarethatdeterminesthefunctionalityofnetworkdevices.Whenyoutroubleshootaproblem,werecommend
youtostartbycheckingthecurrentrmwareversion.Thelatestrmwareversionmightcontainacorrectionthatxesyour
particularproblem.
Tocheckthecurrentrmware:
1.Gotothedeviceinterface>Status.
2.SeethermwareversionunderDeviceinfo.
55

Axis P3265-LVE Specifications

General

Type	-
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wired
Sensor type	CMOS
Optical sensor size	1/2.8 \
Pan speed	190 °/sec
Tilt angle range	-10 - 80 °
Angle of rotation	190 °
Minimum illumination	0.1 lx
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Lens diameter	22 mm
Number of lenses	1
Focal length range	3.4 - 8.9 / 9 - 22 mm
Audio system	2-way
Built-in microphone	No
Power source type	PoE
Power consumption (max)	10.7 W
Power consumption (Power over Ethernet (PoE))	4.8 W
Operating temperature (T-T)	-40 - 50 °C
IK code	IK10
Form factor	Dome
Mounting type	Ceiling
Product color	Black, White
International Protection (IP) code	IP66
Networking standards	IEEE 802.1x
Harmonized System (HS) code	85258900