AXIS P5532/P5534 Installation Guide Page 3
ENGLISH
AXIS P5532 & AXIS P5534
Installation Guide
This installation guide provides instructions for installing an AXIS P5532/AXIS P5534 PTZ Dome
Network Camera on your network. For all other aspects of using the product, please see the User’s
Manual, available on the CD included in this package, or from www.axis.com
Installation Steps
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware.
• Prepare for installation, see page 6.
• Hard ceiling mount, see page 7.
• Drop ceiling mount, see page 8.
• Bracket mount (optional accessory), see page 10.
• Install the AXIS T8123 High PoE Midspan 1-port, see page 11.
4. Assign an IP address. See page 12.
5. Set the password. See page 15.
Package Contents
Item Models/variants/notes
Network camera AXIS P5532
AXIS P5534
Dome covers Clear transparent cover (pre-mounted)
Smoked transparent cover
Mounting kit Mounting kit for hard ceilings and drop ceilings
Resitorx screw driver
High PoE Midspan AXIS T8123
CD AXIS Network Video Product CD, including product documentation,
installation tools and other software.
Printed materials AXIS P5532/P5534 Network Camera Installation Guide (this document),
Axis Warranty Document, Drill template, Extra serial number labels (2x),
AVHS Authentication key
Optional accessories AXIS T91A Mounting Accessories
Multi-connector cable for connection of I/O, audio, and power
See www.axis.com for information on power accessories and outdoor housings
Important!
This product must be used in
compliance with local laws and
regulations.
To Next Page
Loading...
Need help?
General
