Do you have a question about the Axis P5512 and is the answer not in the manual?
Model | P5512 |
---|---|
Camera Type | Network Camera |
Image Sensor | 1/4" progressive scan RGB CMOS |
Sensor Type | CMOS |
Frame Rate | Up to 30 fps |
Digital Zoom | 12x |
Minimum Illumination | 0.5 lux |
Day/Night | Yes |
IR Illuminators | No |
Tilt Range | 90° |
Compression | H.264, MJPEG |
Audio Support | Two-way audio |
Ethernet Port | 10/100 Mbps |
Ingress Protection | IP66 |
Vandal Resistance | IK10 |
Type | PTZ Dome |
Pan Range | 360° |
Protocols | HTTP, HTTPS, FTP, RTSP, RTP, UDP, TCP, IGMP, DHCP, DNS, NTP, UPnP, SNMP |
Power Supply | PoE (IEEE 802.3af) |
Power Source | PoE or |
Power over Ethernet | Yes |
Operating Temperature | -20 °C to 50 °C |
Operating Conditions | Indoor |
Field of View (Horizontal) | 31° to 93° |
Instructions for accessing the product's interface via a web browser.
Covers internet access, setting the root password, and understanding the live view page.
Explains manual triggers, action buttons, media control toolbar, and live view functions.
Details on using PTZ controls, joystick emulation, presets, and focus.
Explains H.264 protocols, MJPEG options, and AMC for viewing.
Outlines essential initial setup steps for users and network configuration.
Covers stream profiles, image adjustments, H.264/MJPEG settings, and overlay options.
Overview of triggers like detectors, hardware, PTZ, and time-based events.
Defining actions like recording, notifications, and configuring recipients for event data.
Covers user access, passwords, IP filtering, HTTPS, and IEEE 802.1X authentication.
Covers basic TCP/IP, IPv4/IPv6, DHCP, static IP, and ARP/Ping methods.
Managing storage devices (SD card, network share) and configuring I/O ports.
Resetting to defaults, scripting, file uploads, and plain config.
Procedures for checking, upgrading firmware, and emergency product recovery.
Resolving IP address, remote access, and H.264 streaming problems.