Need help?Do you have a question about the Axis P5624-E and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Certification | IP66\\r IK10\\r NEMA 4X |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Full HD | No |
| Maximum resolution | 1280 x 720 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 320 x 180, 1280 x 720 (HD 720) |
| Pan range | 0 - 360 ° |
| White balance | Auto |
| Tilt angle range | 0 - 180 ° |
| Camera shutter speed | 0.000035714 - 2 s |
| Minimum illumination | 0.01 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/2.9 \ |
| Optical zoom | 18 x |
| Focus adjustment | 1.6 - 2.8 |
| Focal length range | 4.7 - 84.6 mm |
| Security algorithms | HTTPS, SSH, SSL/TLS |
| Password protection type | User |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Compatible memory cards | SDHC |
| Maximum memory card size | 64 GB |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3(MIB - II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP , IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
| Compliance industry standards | PoE IEEE 802.3at |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Power source type | PoE |
| Power consumption (max) | 15 W |
| Power consumption (typical) | 9 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 10 - 100 % |
Weight and Dimensions| Width | 188 mm |
|---|---|
| Height | 217 mm |
| Weight | 2500 g |
Defines different levels of hazard warnings such as DANGER, WARNING, and CAUTION.
Details physical ports like the network connector and buttons on the camera.
Steps to connect and view the camera via a web browser.
How to access the camera remotely over the internet.
Procedure to set the initial administrator password for secure access.
Information on Pan, Tilt, and Zoom functionality and their associated controls.
Details on configuring H.264 video streams for efficient bandwidth usage.
Provides shortcuts for essential initial product settings like users and network.
Configuration options for video streams including image and H.264/MJPEG tabs.
Adjusting resolution, compression, frame rate, and image quality settings.
Advanced image adjustments for color, brightness, contrast, and sharpness.
Saving and recalling specific camera views for quick PTZ positioning.
Configuring motion detection areas (windows) and sensitivity parameters.
Step-by-step process for installing applications on the camera.
Defining conditions (triggers) and actions for automated event responses.
Lists various triggers for action rules including hardware, PTZ, and storage events.
Locating and filtering stored video recordings by time, event, or storage.
Managing user accounts, passwords, and access levels (Viewer, Operator, Admin).
Configuring fundamental network parameters like IP version and DHCP.
Setting up static or DHCP for IPv4 addressing.
Formatting, mounting, and unmounting SD cards for storage.
Restarting the product and restoring factory default settings.
Restoring the product to its original factory default settings.
Verifying the current firmware version to identify potential fixes.
Process for updating the product's firmware to the latest version.
Resolving issues related to setting the product's IP address.
Factors affecting product performance and frame rate, such as resolution and bandwidth.
To Next Page
