Axis P5624-E - Preparations; Pretreatment of parts

AXISP56PTZNetworkCameraSeries
Impactonwarranty
Preparations
•Theequipmentmustbedisassembledaccordingtoinstructions.
•Eachpartshouldbestrippedfromcomponentsandcrucialpartsmaskedtoensuresuccessfulreassembly.
•Allpartstoberepaintedshouldbestrippedofgaskets,screws,electricalcomponents,connectorsandplugs,windows
anddomes.
•Allpartstoberepaintedmustbethoroughlycleanedtoremovegrease,dustoroil.
•Toensurereassemblyandfunctionalityoftheproduct,openingsforscrews,LEDindicators,ormicrophonesmust
bemaskedbeforepainting.
Pretreatmentofparts
Dependingonthepartmaterialandtypeofpaintappliedatfactory,differentpretreatmentsshouldbedoneforthenewpaintto
adhereaswellaspossible.Forallvariantsthough,propercleaningtoremoveoil,greaseanddustisstronglyrecommended.
Formoreinformationonthematerialsusedintheproduct,seeitsdatasheetatwww.axis.com
Powdercoatedparts-Usingnesandpaper,removetheoriginalpowdercoatingdowntothestainlesssteelsurfaceandcleanthe
partsbeforepainting,oruseaprimer.
Anodisedandchromatedparts-Useaprimer.
Uncoatedstainlesssteel-Nospecialpretreatmentisneeded,butmakesurethatthesurfaceiscleanbeforepainting.
Plastic-Useaprimer.
3