With bitrate control, you can manage the bandwidth consumption of your video stream.
Variable bitrate (VBR)
With variable bitrate, the bandwidth consumption varies based on the level of activity in the
scene. The more activity in the scene, the more bandwidth you need. You are guaranteed
constant image quality but it requires storage margins.
Maximum bitrate (MBR)
With maximum bitrate, you can set a target bitrate to handle bitrate limitations in your
system. You may see a decline in image quality or frame rate when the instantaneous bitrate
is kept below the specified target bitrate. You can choose to either prioritize image quality or
frame rate. We recommend that you configure the target bitrate to a higher value than the
expected bitrate. This gives you a margin for additional complexity that needs to be captured.
1. Target bitrate
Average bitrate (ABR)
To Next Page
Loading...
