The TPM (Trusted Platform Module) is a component that provides cryptographic features to
protect information from unauthorized access. It is always activated and there are no settings
you can change.
To learn more about TPM, go to axis.com/press-center/media-resources/white-papers.
Important
Reset to factory default should be used with caution. A reset to factory default resets all
settings, including the IP address, to the factory default values.
To reset the product to the factory default settings:
Loitering: triggers an alarm when a person or a vehicle remains in a zone defined on the
ground for more than a predefined number of seconds.
Zone-crossing: triggers an alarm when a person or a vehicle passes through two or more
zones defined on the ground in a given sequence.
Conditional: triggers an alarm when a person or a vehicle enters a zone defined on the
ground without first passing through another zone or zones defined on the ground.
Security
TPM module
Troubleshooting
Reset to factory default settings
1. Disconnect power from the product.
2. Press and hold the control button while reconnecting power. See Product overview.
3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes
To Next Page
Loading...
