Axis Q8741-E - Troubleshooting; Reset to Factory Default Settings

AXISQ87BispectralPTZNetworkCameraSeries
Troubleshooting
Troubleshooting
Resettofactorydefaultsettings
CAUTION
Riskofinjury.Movingparts.Keepyourbodypartsawayfromtheproductwheninoperation.Disconnectfrompower
supplybeforeinstallingorperformingmaintenanceontheproduct.
CAUTION
Riskofinjury.Hotsurface.Donottouchtheproductwheninoperation.Disconnectfrompowersupplyandallowthe
surfacestocoolbeforeperformingmaintenanceontheproduct.
NO NO
NO
TICE TICE
TICE
Removingthetopcoverexposespartsofthevisualcamerathataresensitivetoimpact.Avoidhittingtheunprotectedcamera
withthetopcoveratdisassembly.
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultwillresetallsettings,includingtheIP
address,tothefactorydefaultvalues.
Note
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpagesonwww.axis.com/support/downloads
1.Disconnectpowerfromtheproduct.
2.Loosenthefourtopcoverscrewsandremovethetopcover.
3.ChangethepositionoftheFactorydefaultswitch.
4.Replacethetopcoverandtightenthescrews(torque2.0Nm).
15