Axis Q6032 User Manual (English)

Other manuals for Axis Q6032

Installation Guide146 pages

Install Guide2 pages

Questions and Answers:

M
Michael WatsonJul 26, 2025
Why Axis Security Camera cannot be accessed from browser?
- E
  Eric BlackJul 26, 2025
  If HTTPS is enabled, make sure you're using the right protocol (HTTP or HTTPS) when you log in. You might need to manually type 'http' or 'https' in the browser's address bar. If the camera and your device are on the same network, use AXIS IP Utility to find the camera by its model or serial number. As an alternative, move the Axis camera to a separate network without DHCP or BOOTP server. Set the IP address again using AXIS IP Utility or ARP/Ping. Open the Setup pages and disable DHCP in the TCP/IP settings. Return the camera to the main network, so it now has a fixed IP address that won't change.
G
Gregory DuncanAug 4, 2025
What to do if Axis Security Camera is accessible locally but not externally?
- R
  Rachel FosterAug 4, 2025
  To allow incoming data to the Axis camera, enable the NAT-traversal feature to automatically configure the router. Consult your network administrator regarding the Internet firewall. Also, verify if you need to configure the router settings.
E
Edward Hinton MDAug 15, 2025
How to fix problems setting the IP address on Axis Q6032?
- R
  rebeccaleeAug 15, 2025
  Try the installation again, ensuring the IP address is set within two minutes of powering on the device and that the Ping length is set to 408. If the camera's IP address and your computer's IP address are on different subnets, you won't be able to set the IP address; contact your network administrator for an appropriate IP address. Disconnect the Axis camera from the network and use the Ping command to check if the IP address is already in use. If it is, get a new IP address from your network administrator and reinstall the camera. Note that the static IP address in the Axis camera is used before the DHCP server sets a dynamic address, so if another device uses the same default static IP address, access problems may occur.

Axis Q6032 Specifications

General

Maximum resolution	752 x 480 pixels
Supported video modes	-
Pan range	0 - 360 °
Tilt angle range	0 - 180 °
Minimum illumination	0.008 lx
Sensor type	CCD
Progressive scan	Yes
Optical sensor size	1/4 \
Digital zoom	12 x
Optical zoom	35 x
Zoom capability	420
Focal length range	3.4 - 119 mm
Placement supported	Indoor
Connectivity technology	Wired
Built-in HDD	No
Flash memory	128 MB
Internal memory	256 MB
Compatible memory cards	SD, SDHC
LED type	IR
Form factor	Dome
Mounting type	Ceiling
Product color	White
International Protection (IP) code	IP52
Interface	RJ-45
Ethernet LAN (RJ-45) ports	1
Audio system	2-way
Cabling technology	10/100Base-T(X)
DC output voltage	+12V2
Power source type	PoE
AC input frequency	60 Hz
Power consumption (typical)	30 W

Weight and Dimensions

Width	198 mm
Height	233 mm
Weight	2600 g

Summary

Hardware Overview

Connectors Description

Describes the network connector (RJ-45) and its capabilities, including PoE+.

Accessing the Product

Access via Web Browser

Guides users on how to access the product's interface via a web browser.

Internet Access Configuration

Explains how to configure network settings to make the product accessible from the internet.

Setting the Root Password

Details the process of setting the initial administrator password for secure access.

Live View Page Controls

Describes various control buttons available on the Live View page, like Stream Profile, Pulse, Trigger.

PTZ Controls Overview

Introduces PTZ controls and their management via user priority and control queue.

PTZ Control Panel Features

Describes advanced PTZ controls accessible via the control panel, including joystick emulation and tours.

Media Streams

H.264 Streaming Methods

Details different methods for streaming H.264 video, including unicast and multicast RTP.

Accessing Audio Streams

Describes methods for accessing audio streams, including VAPIX API, Windows Media Player, and QuickTime.

Product Setup Guide

Basic Setup Steps

Provides a quick guide to essential setup settings before using the Axis product.

Video and Audio Configuration

Video Stream Settings

Explains how to configure video stream settings like resolution, compression, and frame rate.

Image Settings Overview

Covers image adjustments such as resolution, compression, and rotation.

H.264 Stream Configuration

Details H.264 stream configuration, including GOV structure, bit rate, and text overlay.

MJPEG Stream Configuration

Explains MJPEG stream settings, focusing on maximum frame size for bandwidth optimization.

Camera Settings Details

Covers advanced camera settings like color saturation, brightness, sharpness, and white balance.

Wide Dynamic Range and Exposure Settings

Explains WDR, exposure control, backlight compensation, and exposure zones for image quality.

IR Cut Filter and Image Settings

Privacy Mask Configuration

Audio Channel Modes

Audio Input Configuration

Audio Output Configuration

Live View Configuration

Live View Layout Customization

PTZ (Pan Tilt Zoom) Operations

Preset Positions Configuration

Explains how to set, save, and manage predefined camera positions for quick access.

Autotracking Setup

Guides on configuring the product to automatically track moving objects in the field of view.

Autotracking Configuration and Limits

Guard Tour Setup and Configuration

Advanced PTZ Settings

PTZ Control Queue Management

Event Management

Event Types and Triggers

Defines event types and lists various triggers, such as motion detection or system events.

Event Actions Overview

Event Type Configuration

Setting Up Triggered Events

Provides an example of setting up a triggered event, such as motion detection for image upload.

Setting Up Scheduled Events

Save Stream Configuration

Motion Detection Setup

Details how to set up motion detection windows, including include and exclude areas.

Motion Detection Parameters

Audio Detection Setup

Recordings Management

Event Recordings Access and Management

Continuous Recording

Starting Continuous Recording

System Options

Security Settings Overview

Covers user access control, IP address filtering, HTTPS, and IEEE 802.1X network access.

User Access Control Configuration

HTTPS Configuration

IEEE 802.1X Network Authentication

Network Configuration Basics

Details basic TCP/IP settings, including IPv4/IPv6, DHCP, and static IP address configuration.

Advanced TCP/IP Network Settings

NAT Traversal Configuration (IPv4)

Storage Device Management (SD Card)

Ports and Devices Configuration (I/O Ports)

Maintenance Functions

Resetting to Factory Default Settings

Explains the procedure for resetting the product's parameters to their factory default state.

Troubleshooting Guide

Checking and Upgrading Firmware

Guides on checking firmware version and performing firmware upgrades.

Emergency Recovery Procedure

Outlines steps to recover the product if a firmware upgrade fails or is interrupted.

IP Address Troubleshooting

Addresses common issues with setting and accessing the product's IP address.

Browser Access Troubleshooting

H.264 Format Troubleshooting

Web Page Image Display Issues

Performance and Image Update Issues

Audio and Storage Troubleshooting

Technical Specifications

Camera and Lens Specifications

Details specifications for the camera sensor, lens, minimum illumination, and shutter time.

PTZ and Video Specifications

Lists specifications for PTZ functionalities, video compression, resolutions, and frame rates.

Network and System Integration Specifications

Covers network protocols, system integration interfaces, and alarm triggers/events.

General Specifications (Casing, Power, Connectors)

Performance Considerations

Discusses factors affecting system performance, such as bandwidth, frame rate, and CPU load.

Related product manuals