AXIS Q6032 PTZ Dome Network Camera
Hardware overview
• Connecting to an AXIS Video Hosting System service, see pag e 40. To connect, press and hold the button until the
Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service, see page 41. To connect, press the button once.
• Restoring the product to factory default settings, see page 47.
Multi-connector - Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP
rating, see Multi-Connector Cable (so ld separately), on page 48.
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with remo vable storage. For
instructions on how to insert and remove an SD card, please refer to the Installation Guide.
Note
Before removal, the SD card should be unmounted to prevent corruptio n of recordings. To unmount the SD card, go to Setup
>SystemOptions>Storage>SDCardand click Unmount.
LED indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgr ade .
Amber/red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for fi rmware upgrade failure.
Green Shows steady green for 10 seconds for normal o
peration after restart.
5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
