Need help?Do you have a question about the Axis Q6075 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Certification | 55032 A, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC 15 B A, ICES-003 A, VCCI A, RCM AS/NZS CISPR 32 A, KCC KN32 A, KN35 IEC/EN/UL 60950-1 IEC/EN 62368–1 IEC/EN 60529 IP52, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78 NIST SP500-267 EN 60950-1, GS, UL, cUL, CE, FCC, VCCI, CB, KCC, UL-AR |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 180 ° |
| Camera shutter speed | 1/11000 - 1/3 s |
| Minimum illumination | 0.03 lx |
| Digital zoom | 12 x |
| Optical zoom | 40 x |
| Number of lenses | 1 |
| Focal length range | 4.25 - 170 mm |
| Maximum aperture number | 4.95 |
| Minimum aperture number | 1.6 |
| Voice codecs | G.711, G.726, PCM |
| Audio formats supported | AAC |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| Housing material | Aluminum |
| International Protection (IP) code | IP52 |
| AC input voltage | 100 - 240 V |
| Power source type | AC, PoE |
| Power consumption (max) | 22.4 W |
| Wi-Fi | No |
| Networking standards | IEEE 802.1x, IEEE 802.3at |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4, IPv6 USGv6, HTTP, HTTPSa , SSL/TLSa , QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP® , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, NTCIP, LLDP |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Bit rate control | Variable Bit Rate (VBR) |
| Total megapixels | - MP |
| Maximum resolution | 1920 x 1080 pixels |
| Video compression formats | AVC, H.264, H.265, HEVC, M-JPEG, MPEG4 |
| Sensor type | CMOS |
| Optical sensor size | 1/2.8 \ |
| Security algorithms | EAP-TLS |
| Flash memory | 512 MB |
| Internal memory | 1024 MB |
| Compatible memory cards | SD, SDHC, SDXC |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Height | 240 mm |
|---|---|
| Weight | 2850 g |
| Diameter | 198 mm |
How to locate Axis devices on your network using utility tools like AXIS IP Utility.
Configuring fundamental settings like capture mode and power line frequency for optimal operation.
Managing pan, tilt, and zoom movements and setting operational limits to protect privacy.
Configuring video stream settings, compression, and network storage for recordings.
Creating rules to trigger actions based on specific conditions like motion or loud noises.
Configuring the system to detect motion and trigger actions like recording or preset movements.
Configuring video codecs, frame rates, compression, and creating custom stream profiles.
Storing and managing specific pan, tilt, and zoom positions for quick camera navigation.
Setting up network parameters (IP, DNS), system time, location, and device applications.
Configuring event triggers, actions, and defining notification recipients for alerts.
Information on signed firmware, secure boot, and TPM module for device security and integrity.
Step-by-step instructions on how to restore the device to its original factory default settings.
Troubleshooting common problems like firmware upgrade failures, IP address conflicts, and browser access issues.
To Next Page
