Need help?Do you have a question about the Axis Q6075-S and is the answer not in the manual?
General| Camera Type | PTZ |
|---|---|
| Max Frame Rate | 60 fps |
| Digital zoom | 12x |
| Min. illumination (Color) | 0.3 lux |
| Min. illumination (B/W) | 0.03 lux |
| Sensor Type | 1/2.8" CMOS |
| Pan | 360° |
| Pan/Tilt Speed | 300°/s |
| Video compression | H.264, H.265, MJPEG |
| Resolutions | 1920x1080, 1280x720 |
| Frame rate | up to 60 fps |
| Audio compression | G.711, G.726, AAC |
| Audio input/output | 1 input, 1 output |
| Edge storage | microSD/microSDHC/microSDXC card |
| Power Supply | 12 V DC or PoE |
| Ingress Protection | IP66 |
Step-by-step guide to creating the first administrator account for the device.
Recommendations for passwords and steps to ensure firmware integrity.
Covers initial device configurations like capture mode, power line frequency, and orientation.
Details using remote PTRZ functionality to adjust the camera's view and focus.
Details on selecting exposure modes and utilizing night mode for low-light conditions.
Covers setting PTZ movement limits and creating guard tours.
Guide to configuring network storage for saving recordings.
How to define rules with conditions and actions for device events.
Settings for IR-cut filter, IR light, and various exposure modes.
Settings for video stream resolution, palette, frame rate, compression, and Zipstream.
Managing bandwidth consumption through bitrate reduction settings.
Creating and configuring guard tours using preset positions.
Configuring IP addresses, subnet masks, routers, hostnames, and DNS servers.
Managing device security through certificates and SNMP settings.
Configuring IEEE 802.1x for network authentication and preventing brute-force attacks.
Adding, managing, and configuring user accounts and privileges.
Setting up network shares for saving recordings.
Creating and configuring stream profiles for different video stream settings.
Configuring digital inputs and outputs for external devices.
Performing device maintenance like restart, restore, and factory reset.
Steps and options for upgrading the device firmware.
Details on Maximum Bitrate (MBR) and Average Bitrate (ABR).
Details the I/O connector for external devices and its pin configurations.
Instructions and precautions for resetting the device to factory default settings.
Information on firmware tracks and procedures for checking and upgrading firmware.
Troubleshooting common problems related to firmware upgrades and IP address configuration.
Solutions for problems with video streams and sound files.
Factors affecting device performance, bandwidth, and frame rate.
To Next Page
