Need help?Do you have a question about the Axis Q6010-E and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POL, POR, RUS |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Total megapixels | 5 MP |
| Maximum resolution | 2592 x 1944 pixels |
| Video formats supported | AVC, H.264, H.265, HEVC, MPEG4 |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Supported graphics resolutions | 320 x 240, 2592 x 1944 |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/2.5 \ |
| Fixed focal length | 2.8 mm |
| Maximum aperture number | 2 |
| Camera shutter speed | 1/32500 - 1/20 s |
| Minimum illumination | 0.03 lx |
| Bluetooth | - |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Supported network protocols | IPv4, IPv6 USGv6, HTTP, HTTP/2, HTTPSa , SSL/TLSa , QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP® , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCPv4/v6, ARP, SOCKS, SSH, NTCIP, LLDP, MQTT, Syslog |
| Security algorithms | 802.1x RADIUS, HTTPS |
| Alert notification type | |
| Flash memory | 512 MB |
| Internal memory | 2048 MB |
| Compatible memory cards | SD, SDHC, SDXC |
| IK code | IK10 |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| Housing material | Aluminum |
| International Protection (IP) code | IP66 |
| Power source type | PoE |
| Power consumption (max) | 22 W |
| Power consumption (Power over Ethernet (PoE)) | 9 W |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -50 - 50 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 100 % |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Height | 201 mm |
|---|---|
| Weight | 4500 g |
| Diameter | 395 mm |
Instructions on locating the Axis device within the network using software tools.
Lists supported web browsers for accessing the device interface.
Steps to access the device's web interface by entering its IP address or hostname.
Procedure for setting a secure password for the device's root account upon first login.
Recommendations and best practices for creating and managing strong, secure passwords.
Provides a visual overview and explanation of the device's web interface layout.
Details on modifying image settings like lens selection, focus, and exposure modes.
Optimizing image quality for low-light, noise reduction, motion blur, and backlight compensation.
Steps to create and apply privacy masks to obscure specific areas in the video feed.
Instructions for configuring video streaming, reducing bandwidth, and setting up storage for recordings.
How to create event-triggered rules for actions like recording based on detected motion or tampering.
Configuring actions like text overlays and email notifications triggered by specific events.
Explains the function and application of privacy masks in video monitoring.
Details on video compression formats, stream settings, and how they relate to each other.
Explanation of bitrate control methods (VBR, MBR, ABR) for managing bandwidth consumption.
Information about the AXIS Camera Application Platform (ACAP) and third-party applications.
Describes the Autopilot application for monitoring areas of interest and triggering recordings.
Procedure for resetting the device to its original factory default settings.
Overview of Axis firmware tracks (Active and LTS) and their implications.
Steps to verify the installed firmware version to aid in troubleshooting.
Instructions on how to download and install the latest firmware for the device.
Common technical problems and their solutions, including IP address issues and browser access.
Factors affecting device performance, such as image resolution, bandwidth, and CPU load.
Information on how to contact Axis support for further assistance with issues.
Visual identification and labeling of the camera's physical components and connectors.
Explanation of the status LED indicators and their meanings for device operation.
Information regarding the SD card slot, supported card types, and handling precautions.
Details on the function and operation of the device's physical buttons.
Description of the available connectors, including the network connector and its IP rating.
To Next Page
