Axis Q6010-E - Configure your device; Adjust the image

AXISQ6010-ENetworkCamera
Configureyourdevice
Configureyourdevice
Adjusttheimage
Thissectionincludesinstructionsaboutconguringyourdevice.Ifyouwanttolearnmoreabouthowcertainfeatureswork,go
toLearnmoreonpage13.
Replacethelens
1.Stopallrecordingsanddisconnectpowerfromtheproduct.
2.Removethelens.
3.Attachthenewlens.
4.Reconnectthepower.
5.Logintotheproduct’swebpage,gotoSettings>System>Orientation>CameraX>Lensselectionandselectthe
newlens.
6.Adjustthefocus.
7.Doapositioningcalibrationofthecamera.
Adjustthefocus
Toadjustthezoom:
1.GotoVideo>Installationandusethezoomslidertoadjust.
Toadjustthefocus:
1.GotoVideo>Installationandclick
toshowtheautofocusarea.
2.Adjusttheautofocusareatocoverthepartoftheimagethatyouwanttobeinfocus.
Ifyoudon’tselectanautofocusarea,thecamerafocusesontheentirescene.Werecommendthatyoufocusona
staticobject.
3.ClickAutofocus.
4.Tonetunethefocus,usethefocusslider.
Selectexposuremode
Toimproveimagequalityforspecicsurveillancescenes,useexposuremodes.Exposuremodesletsyoucontrolaperture,shutter
speed,andgain.GotoVideo>Image>Exposureandselectbetweenthefollowingexposuremodes:
•Formostusecases,selectAutomaticexposure.
•Forenvironmentswithcertainarticiallighting,forexampleuorescentlighting,selectFlicker-free.
Selectthesamefrequencyasthepowerlinefrequency.
•Forenvironmentswithcertainarticiallightandbrightlight,forexampleoutdoorswithuorescentlightingatnightand
sunduringdaytime,selectFlicker-reduced.
Selectthesamefrequencyasthepowerlinefrequency.
•Tolockthecurrentexposuresettings,selectHoldcurrent.
5