Need help?Do you have a question about the Axis Q6045 and is the answer not in the manual?
General| Type | - |
|---|---|
| PTZ control | Yes |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| International Protection (IP) code | IP52 |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264, M-JPEG |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 180 ° |
| Camera shutter speed | 1/4 - 1/33000 s |
| Minimum illumination | 0.4 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Digital zoom | 12 x |
| Optical zoom | 20 x |
| Zoom capability | 240 |
| Focal length range | 1.6 - 2.9 mm |
| Built-in HDD | No |
| Flash memory | 128 MB |
| Compatible memory cards | SD, SDHC, SDXC |
| Maximum memory card size | 64 GB |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPSa, SSL/TLSa, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio system | 2-way |
| Audio formats supported | ADPCM, LC-AAC, PCM |
| AC input voltage | 100-240 V |
| Power source type | PoE |
| AC input frequency | 60 Hz |
| Storage temperature (T-T) | 10 - 85 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | -40 - 65 % |
Weight and Dimensions| Height | 240 mm |
|---|---|
| Weight | 2600 g |
| Diameter | 198 mm |
Details the various connectors and buttons on the Axis product.
Instructions on how to access the product's interface via a web browser.
Details on configuring the network router for internet access to the product.
Steps to set the initial administrator password for secure access.
Overview of controls available on the Live View page for camera operation.
Information on enabling/disabling and using Pan/Tilt/Zoom controls.
Explains different protocols and methods for streaming H.264 video.
Provides shortcuts to essential initial configuration settings for the product.
Defines settings for video stream formats like Image, H.264, and MJPEG.
Details settings for image appearance like resolution, compression, and rotation.
Explains H.264 compression, profiles, and bit rate settings for video streams.
Advanced image settings including color, brightness, sharpness, and white balance.
Configuration of audio modes like full duplex, half-duplex, and simplex.
Customizes the Live View page layout and controls.
Define and access predefined camera views for quick steering.
Adjusts sensitivity, history, and object size for motion detection.
Generates an alarm when audio levels rise above or fall below a threshold.
Steps for uploading, installing, and starting third-party applications.
Trigger rule when motion is detected within specified areas.
Defines conditions to trigger actions like recording or notifications.
Lists and allows playback/download of recorded videos.
Configures the product to continuously save video to a storage device.
Manages user access, passwords, and network security settings.
Configures product date, time, and time zone settings for accurate logging.
Settings for network configuration, IP addressing, and protocols.
Configures IP version 4 and IP version 6 address settings.
Sets up IP address acquisition via DHCP or static assignment.
Configures port mapping for external access from the internet.
Manages SD card insertion, formatting, and unmounting for storage.
Manages SD card insertion, formatting, and unmounting for storage.
Manages ports and connected devices, including I/O ports.
Configures four configurable input/output ports for external devices.
Procedure to reset the product to its original factory default settings.
Resets most settings to factory defaults, excluding IP parameters.
Resets all settings, including IP address, to factory default values.
Displays product status, settings, firmware version, and recent log items.
Generates logs and reports for system analysis and troubleshooting.
Interface for external devices like alarms, motion detection, and event triggering.
How to check the current firmware version for troubleshooting.
Instructions for upgrading the product with the latest firmware.
Steps to recover the product if firmware upgrade fails.
Troubleshooting issues related to setting the product's IP address.
Solutions for issues preventing access to the product via a browser.
Solutions for issues related to H.264 video streaming problems.
General troubleshooting for unsatisfactory video and image quality.
Specifications for video compression, resolutions, frame rates, and streaming.
To Next Page
