Need help?Do you have a question about the Axis Q6042 and is the answer not in the manual?
General| PTZ | Yes |
|---|---|
| Day/Night | Yes |
| Pan Range | 360° |
| Compression | H.264 |
| Audio Support | Yes |
| Power over Ethernet | Yes (IEEE 802.3af) |
| Environment | Indoor |
| IR Cut Filter | Yes |
| Local Storage | SD/SDHC/SDXC card slot |
| Sensor Type | CMOS |
| Lens Type | Varifocal |
| Aperture | f/1.6 |
| Minimum Illumination | 0.01 lux |
| Frame Rate | 30 fps |
| Network Interface | 10/100 Mbps Ethernet |
Steps to access via browser and set initial security password.
How to operate camera pan, tilt, zoom, focus, and iris functions.
Essential initial configuration steps for product setup.
Saving camera views, creating guard tours, and tour recording.
Defining rules for automated actions based on detected events.
Configuring user access, IP, DNS, and network security.
Guide to checking, upgrading, and recovering firmware for the product.
To Next Page
