Need help?Do you have a question about the Axis Q6034 and is the answer not in the manual?
General| Maximum resolution | 1280 x 720 pixels |
|---|---|
| Video formats supported | H.264 |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 180 ° |
| Camera shutter speed | 1/10000 - 1/4 s |
| Digital zoom | 12 x |
| Optical zoom | 18 x |
| Focal length range | 4.7 - 84.6 mm |
| Video motion detection | Yes |
| Sample rate | 16 kHz |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Dimensions (WxDxH) | 198 x 198 x 240 mm |
| Power requirements | 100 - 240 V AC |
| Power source type | PoE |
| Power consumption (typical) | 17 W |
| Certification | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, KCC Class B, IP52, IEC 60721-4-3 Class 3K3, 3M3, EN/IEC 60068-2 |
| Processor model | ARTPEC-3 |
| Flash memory | 128 MB |
| Internal memory | 256 MB |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Weight | 2600 g |
|---|
Steps to access the product's interface using a web browser like Internet Explorer, Firefox, or Safari.
Guidance on configuring router settings for remote access to the product via the Internet.
Procedure for setting the initial administrator password for secure access.
Overview of controls available on the Live View page for managing camera functions.
Explanation of PTZ (Pan/Tilt/Zoom) controls available on the Live View page for camera movement.
Details on different protocols like RTP, RTSP, and HTTP for streaming H.264 video.
Provides quick access to essential initial settings for the Axis product.
Defines video stream settings such as image appearance, resolution, and frame rate.
Creating and managing predefined camera positions for quick steering.
Configuring motion detection by defining include and exclude windows for the camera view.
Defining conditions and actions for events, such as recording video upon motion detection.
Managing user accounts, access levels (Viewer, Operator, Administrator), and anonymous login.
Basic TCP/IP settings for IPv4 and IPv6, including DHCP and static IP address configuration.
Details on obtaining IP addresses via DHCP or setting a static IP address for IPv4.
Managing storage devices, including SD cards and network shares, for recordings.
Details on inserting, formatting, and managing SD cards for local recording.
Performing maintenance tasks like restarting, restoring default settings, and testing PTZ.
Procedure to reset all product parameters, including IP address, to factory default values.
How to check the current firmware version and its importance for troubleshooting.
Common problems, their causes, and suggested solutions for setting IP addresses and accessing the product.
Detailed specifications for the camera sensor, lens, illumination, shutter time, and PTZ capabilities.
Details on supported protocols, security features, and system integration capabilities.
Factors affecting performance, including bandwidth, frame rate, and CPU load.
To Next Page
