AXIS Q6034 PTZ Dome Network Camera
Detectors
Detectors
Motion Detection
Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Motion detection is configured by defining up to 10 Include and Exclude wind ows:
• Include windows —define areas where motion should be detected
• Exclude windows —define areas within an Include window that should be ignored (areas outside Include windows
are automatically ignored).
For instructions, see
Set Up Motion Detection Wind ows, on page 32
.
To control the number of motion detection alarms, the parameters Object Size , History and Sensitivity can be adjusted. See
Motion
Detection Parameters, on page 33
.
Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected.
Possible actions include uploading images and start recording. For more information, see
Setting Up an Action Rule, on page 36
.
Note
Using the motion detection feature may decrease the product’s overall performance.
Set Up Motion Detection Windows
To set u p a motion detection Include Window, follow these instructions :
1. Go to Detectors > Motion Detection.
2. Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter
adescriptivename.
3. Adjust the size (drag the b ottom right-hand corner) and the position (click on the text at the top and drag to the desired
position) of the w indow.
4. Adjust the Object Size, History and Sensitivity profile sliders (see
Motion Detection Parameters
for details). Any detected
motion within an active window is indicated by red peaks in the Activity window.
5. Click Save.
To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the
include window.
To delete an include or exclude window, select the window in the list of windows and click Del.
32
To Next Page
Loading...
Need help?
General
Weight and Dimensions
