Need help?Do you have a question about the Axis Q6074-E PTZ and is the answer not in the manual?
General| Camera Type | PTZ |
|---|---|
| Zoom | 30x optical zoom |
| Tilt Range | -20° to 90° |
| Video compression | H.264, H.265, MJPEG |
| Audio compression | AAC, G.711, G.726 |
| Sensor Type | CMOS |
| Field of View | 2.2° |
| Low Light Performance | 0.02 lux |
| Pan Range | 360° |
| Weather Resistance | IP66 |
| Power over Ethernet | Yes |
| Min. illumination | 0.02 lux |
| Shutter time | 1/3 s |
| Frame rate | Up to 60 fps |
| Audio input/output | 1 input, 1 output |
| Network | 10/100/1000 Mbps Ethernet |
| Protocols | IPv4, IPv6, HTTP, HTTPS, FTP, RTSP, RTP, TCP, UDP, SMTP, SNMP, DHCP, DNS |
| Security | HTTPS |
| Edge storage | MicroSD/microSDHC/microSDXC card slot |
| Power | PoE or 24V AC |
| Operating conditions | -40°C to 50°C (-40°F to 122°F) |
| Casing | Aluminum |
| Day/Night | Automatic |
| Lens | 4.44 - 133.2 mm, F1.6 - 4.7 |
Recommendations for creating and maintaining strong, secure passwords for device access.
Steps to access the Axis device via a web browser after locating it on the network.
Instructions for setting a strong password for the administrator account to protect the device.
Techniques and settings to enhance the camera's ability to recognize license plates.
Setting up the camera to move to a specific preset position upon motion detection.
Configures the camera to record video upon detecting physical shock or tampering.
Information on how to view live streams and access recorded footage.
Creating custom rules to automate actions based on detected events.
Techniques to lower bandwidth usage and storage requirements for video streams.
Configuring the camera to record before and after motion detection events.
Displaying text notifications automatically when motion is detected.
Steps to configure the camera to save recordings to a network storage location.
User-defined areas that obscure parts of the video feed, appearing as solid color or mosaic.
Procedures to reset the camera to its original factory default settings.
Instructions for downloading and installing the latest firmware for the device.
Solutions for issues preventing access to the device via a web browser.
To Next Page
