AXIS Q6032 PTZ Dome Network Camera
PTZ (Pan Tilt Zoom)
Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.
Note
Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can sti ll move to
preset positions that require a tilt movement.
Control Queue
The administrator can s et up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons
appear in the Live View page offer ing one viewer exclusive control for a limited period of time. Other users will be placed in queue.
A u ser who belongs to a group (see Users, on page 38) with a higher PTZ priority can go before other use rs in the queue and
take control of the product. The order of priority is as fo llow s:
1. Administrator — An administrator takes over PTZ control regardless of w ho is first in queue. The adm inistrator will be
removed from the queue 6 0 seconds after the last PTZ control command.
2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page 30).
The event will immediately be placed first in the queue except whe n an administrator is in control.
3. Operator — Same as administrator but with lower priority
4. Guard Tour — A guard tour (see page 26) has PTZ control for an indefinite period of time. It may be overridden by an
operator, event or administrator. The guard tour will resume w hen higher priority groups leave the queue.
5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ co ntrol before control is passed
on to the next viewer in queue.
Note
• The ad minis t rator can enable and disable PTZ controls for selected users.
• To identify different users in the viewer group, cookies must be enabled on the client.
28
To Next Page
Loading...
