What to do if AXITEC AXIbox 11K Battery Charger shows output overload?
If the AXITEC Battery Charger indicates an output overload, it's likely that the AC output current is too high. Immediately shut off the leakage current protection switch of the power distribution cabinet. Also, check for any low resistance connection between the AC output cables of the charger.
What to do if AXITEC AXIbox 11K indicates over leakage current?
If the AXITEC Battery Charger displays an over leakage current warning, it means the leakage current to the earth may be too high. Immediately shut off the leakage current protection switch of the power distribution cabinet. Check for any broken AC output cables or low resistance connection to the earth.
What to do if AXITEC AXIbox 11K has input over voltage?
If the AXITEC Battery Charger is showing an input over voltage error, the AC input voltage may be too high. First, check the input voltage from the backend. If the voltage exceeds 276Vac for a short duration, wait for the power grid to return to the normal voltage range.
What to do if AXITEC AXIbox 11K Battery Charger has reverse connection?
If the AXITEC Battery Charger indicates a reverse connection, it might be due to reverse connection of L/N input cable. Immediately shut off the leakage current protection switch of the power distribution cabinet. Check if AC input/output cables are normal, and if there's an inverse connection of L/N input cables.
What to do if AXITEC AXIbox 11K has input low voltage?
If the AXITEC Battery Charger displays an input low voltage error, it means the AC input voltage may be too low. First, check the input voltage from the backend. If the voltage is under 184Vac for a short time, wait until the power grid recovers to the normal voltage range.
Why is my AXITEC Battery Charger showing over temperature?
If your AXITEC Battery Charger is showing an over temperature warning, the internal temperature may be too high. Check the surrounding conditions of the installed chargers to see if there is a heating device nearby. Make sure the environmental temperature is under 60?.
What to do if AXITEC Battery Charger has input over frequency?
If the AXITEC Battery Charger shows an input over frequency error, it indicates that the AC input frequency may be too high. Check the input voltage frequency from the backend. If the frequency exceeds 63Hz for a short time, wait until the power grid recovers to the normal voltage range.
What to do if AXITEC AXIbox 11K has input low frequency?
If the AXITEC Battery Charger displays an input low frequency error, it means the AC input frequency may be too low. Check the input voltage frequency from the backend. If the frequency is lower than 47Hz for a short time, wait until the power grid recovers to the normal voltage range.
How to fix charging cable connection abnormal on AXITEC AXIbox 11K?
If you are experiencing a charging cable connection issue with your AXITEC Battery Charger, it could be due to a poor connection of the charging cable with the EV/Charger. Check if the charging cable connection is correct and firm.
General| Brand | AXITEC |
|---|---|
| Model | AXIbox 11K |
| Category | Battery Charger |
| Language | English |
To Next Page