Need help?Do you have a question about the Axminster AC2305B and is the answer not in the manual?
Visual and textual guidance on essential safety procedures and precautions before operating the machine.
Essential safety practices for operating machinery, including wearing PPE and situational awareness.
Instructions for assembling the bandsaw stand, focusing on connecting frame components.
Completing the stand assembly and preparing for mounting the main bandsaw unit.
Procedure for securely attaching the main bandsaw unit onto the assembled floor stand.
Procedure for tensioning the saw blade and adjusting its tracking for optimal performance.
Instructions for adjusting the drive belt tension for different bandsaw models.
Steps to ensure the bandsaw table is square to the blade for accurate cuts.
Checking and adjusting the blade's perpendicularity relative to the worktable.
Fine-tuning the table's position to achieve perfect squareness with the blade.
Verifying and adjusting the fence alignment relative to the saw blade.
Adjusting the upper blade guide assembly relative to the saw blade gullets.
Positioning the rear thrust bearing correctly behind the saw blade for support.
Setting the correct clearance for the ceramic side blade guides against the blade.
Essential checks before operation, including tool inspection, safety, and material suitability.
Guidance on proper cutting techniques, feed rates, and handling of the workpiece.
Procedures for safely clearing a jammed saw blade and resuming operation.
Steps to prepare the bandsaw for blade replacement, including table leveling and door opening.
Cautionary advice on unfolding new blades and ensuring correct orientation of teeth.
Procedure for feeding the blade into the saw and securing it properly on the wheels.
Routine checks to perform daily to keep the bandsaw in good working order.
Troubleshooting common issues like cutting won't cut straight or vibrations.
To Next Page
General