Need help?Do you have a question about the Axminster AWESBS and is the answer not in the manual?
Suggestions for good working practices, safety, and tool maintenance.
Advice on mains powered tools, primary precautions, and workplace environment.
Attaching rubber foot bolts to the base support plate.
Assembling side support panels to the base support plate using bolts.
Instructions on fitting the saw table, including blade removal and tensioning adjustment.
Fitting the tilt quadrant to the tilt housing and securing the tilt mechanism bolt.
Placing spacing washers and securing the saw table to the tilt quadrant feet.
Re-fitting the blade and guide fence rail after table installation.
Assembling the back rail and fitting the fence rail using butterfly bolts.
Clipping the guide fence onto the back rail and fence rail, adjusting clamp.
Attaching the guide fence extension casting using coach bolts and knobs.
Instructions on how to tension the blade and adjust its tracking on the wheels.
Procedure to ensure the saw table is perpendicular to the blade.
To Next Page
General