Need help?Do you have a question about the Axminster AC1950B and is the answer not in the manual?
Step-by-step instructions for assembling the bandsaw's floor stand.
Instructions for securely attaching the bandsaw unit to its assembled stand.
Procedure for installing the saw table onto the bandsaw housing.
Instructions on how to properly tension and align the bandsaw blade.
Procedure to ensure the saw table is perfectly square to the blade.
Detailed instructions for adjusting the upper and lower blade guides.
Common reasons and solutions for a bandsaw not cutting straight.
Diagnosing why the bandsaw speed decreases during cutting operations.
Identifying causes and solutions for excessive vibration in the bandsaw.
To Next Page
General