14
WHITE
AXMINSTER
W
Initial Assembly...
Machine Specification...
Axminster No. 200434 (AWESBS)
Motor 240V a.c, 50Hz, 1400rpm, 1.5hp
Wheel Diameter 350mm
Blade Speeds (Off Load) 12-10m/s
Max Cutting Depth.(Throat) (Upright) 200mm
Max Reach (Neck) (Table Flat) 335mm
Blade Length 2490mm
Blade Widths 6-15mm
Table Tilt Right 0-45˚
Weight 80 kgs
Overall Size (On Floor Cabinet) Length 760mm, Width 720mm, Height 1700mm
Dust Extraction Nozzle Diameter 98mm
Cable Length 1.5 Meters
Fig 5
Fig 5a
Fitting the Guide fence Extension
Locate the guide fence extension casting and the two M6 coach bolts. Slide the coach bolts into the
‘T’ slot in the side of the fence casting. (See fig 5) Then slide the fence extension assembly into the
predrilled holes in the slide of the guide fence and secure in place with two plastic M6 knobs and
washers. (See fig 5a)
‘T’ slot
M6 Coach bolt
Fence extension
M6 Knob and washer
To Next Page