7
Axon Cortex
Axon Cortex can be used to change the settings of Synapse
modules from a PC, either locally or remotely. The software
enables communication based on TCP/IP between the setup PC
and Synapse frames/modules.
Each Synapse frame is addressed through its rack controller’s
unique IP address, giving access to each module, its menus and
adjustment items. The Cortex has access to data contained within
the Synapse module and displays it on a GUI. The software has an
intuitive structure following that of the module that it is
controlling.
Details about how to use Cortex can be found in the help-file of
Cortex.
Menu Structure
Example
Slot Module Item Parameter Setting
▲
▲
S02 Identity
▲ ▲
S01 SFS10
►
Settings
►
SDI-
Format
►
Auto
▼ ▼ ▼ ▼
S00 RRC18 Status Mode 625
▼ ▼ ▼
Events Ref-Input 525
▼
H-Delay
▼
▼
To Next Page
Loading...
Need help?
General
