Axon TASER StrikeLight 2 Stun - Chapter 3: Using the StrikeLight 2 Stun Flashlight; Installing the Lanyard (Optional)

7
Chapter 3: Using the StrikeLight 2 Stun Flashlight
Installing the Lanyard (Optional)
The body of the StrikeLight 2 stun ashlight incorporates an opening that accommodates the lanyard.
To install the lanyard:
1 Ensure the safety switch is in the rearward (SAFE) position.
2 Insert the small loop of the lanyard through the opening in the stun ashlight.
3 Insert the large loop of the lanyard through the small loop and pull it taught.