EasyManua.ls Logo

Axxera AC216BI - Audio Adjustments; Tone and Balance Controls; EQ, Loudness, and Subwoofer; Source Volume Level

Axxera AC216BI
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
AC216Bi OPERATION
General Operation
Press the AUDIO/MENU to step through the following audio
adjutment options: Bass, Middle, Treble, Balance, Fader, EQ,
Loudness, Subwoofer and Source Level. Rotate the volume
knob left/right to adjust or activate the desired function.
Press AUDIO/MENU until BASS appears, then rotate
volume knob left/right to adjust ( -6 minimum / +6
maximum).
Press AUDIO/MENU until MIDDLE appears, then rotate
volume knob left/right to adjust ( -6 minimum / +6
maximum).
Press AUDIO/MENU until TREBLE appears, then rotate
volume knob left/right to adjust ( -6 minimum / +6
maximum).
Press AUDIO/MENU until BAL appears then rotate volume
knob left/right to adjust (BAL LEFT 12 - BAL RIGHT 12).
BAL EVEN represents equal balance
Press AUDIO/MENU until FADER appears, then rotate
volume knob left/right to adjust (FADER FRONT 12 - FADER
REAR 12). FADER EVEN represents equal fader
Press AUDIO/MENU until EQ appears, then rotate volume
knob left/right to cycle through the equalization curves:
FLAT (default), POP, JAZZ, CLASSIC, BEAT, ROCK and USER.
Any manual adjustment to the Bass or Treble settings are
automatically saved as USER.
Press AUDIO/MENU until LOUD ON or LOUD OFF appears,
then rotate the volume knob to select desired option.
Activating this feature will enhance the bass and treble
frequencies when listening to music at low volumes.
Press AUDIO/MENU until SUBWFR appears, then rotate
volume knob left/right to adjust the subwoofer level (0-12).
Press AUDIO/MENU until SUBW appears, then rotate
volume knob left/right to select on of the following subwoofer
frequencyy options: 80 Hz, 120 Hz, 160 Hz or Flat.
Press AUDIO/MENU until SRC LEVEL appears. After one
second, the current mode will appear on the display. Turn the
volume knob to adjust the audio level of the current source
(-6 minimum/+6 maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation, press MODE until the
desired mode is selected, then set the source volume level
for that mode.
Audio / Menu
Bass
Middle
Treble
Balance
Fader
EQ
Loudness
Subwoofer Level
Subwoofer Frequency
Source Volume Level