Momentarily press to turn the unit on. Press again to turn
the unit off.
Press RELEASE and pull away from the left side to remove. To
reinstall, insert right side of faceplate first, then push left side to
secure.
Press MODE to select between AM/FM, Disc (DVD, CD-RW,
CD-R, CD-DA), Rear AV Input, Front AUX Input and Bluetooth.
Modes of operation are shown in the display. Optional USB device
and SD card must be connected/inserted to appear in the mode
selection string.
Rotate the volume knob to increase or decrease the volume
level.
Press MUTE on the remote control to silence the audio. Press
MUTE again to return to the previously selected volume.
Insert a 3.5mm cable in the unit's front AUX port or RCA cables
into the rear AV-In connectors.
Connect a USB device to charge desired USB device.
If abnormal operation occurs, press RESET to reset the unit back
to the factory settings. The RESET button is located behind the
front panel.
With the unit on, press and hold DISP until the clock begins to
flash, then release. Press TUNE
nn
to adjust the hours and
TUNE
ll
to adjust the minutes. Press DISP momentarily to
save the selected time.
Press DISP to toggle display between various displayed
information.
Press and hold volume knob for more than three seconds to
access the setup menu. Press volume knob momentarily to select
between the menu functions and rotate the volume knob left/
right to adjust or activate the desired function.
Power On/Off
Faceplate
Removal
Changing Modes
Volume
Mute
Auxiliary Input
USB Port
Reset
Setting the Clock
Display
Setup Menu
General Operation
To Next Page
Loading...
